9300-GA
RESCUER BOOT

EN 15090:2012 F2A HI3 CI AN SRC - D.P.I. III Categoria

< all models FIRE FIGHTERS

size 36-49
upper Upper of full grain leather, black, water repellent treated, and microfiber inserts
lining Lining CROSSTECH® excellent to make a durable barrier against blood and body fluids and a breathable moisture barrier
insole Outsole resistant to fuel oil with composite antiperforation insert
sole New tread with red cleats to monitor the wearing level of the outsole
toe cap New aluminum 200J safety toecap, very light. Asymmetric with supporting base
lacing system Exclusive Jolly rapid off-system with total opening zipper
600%

LEATHER TRANSPIRATION

20%

RADIANT HEAT INSULATION

40%

LONG LASTING SOLE

50%

SOLE BONDING STRENGTH

100%

HEEL ENERGY ABSORPTION

Valori maggiori rispetto ai requisiti minimi richiesti dalla norma

technical sheet download
0110141516181920Tecnologia 1Tecnologia 1Tecnologia 1Tecnologia 1Tecnologia 1Tecnologia 1

TECHNOLOGY PRODUCT

JFS
FLEXIBILITY

The rear padded flexors, those of the centralfront area and inner tongue, allow a correct flexion of the foot in the correct areas, therefore it enables a wide range of movements, especially when walking on scope, going up or downstairs, dirving trucks.

SCS
SOLE COMPENSATOR SYSTEM

We all have a unique foot length and volume. Despite this, industrial production requires standardisation of shoe sizes in accordance with scales that are internationally accepted by all manufacturers. The result is that shoe size does not correspond perfectly to the real size of the foot. To overcome this problem, Jolly has developed the SCS, Sole Compensator System. It consists of insocks of different thickness designed to compensate the volume of the shoe in relation to the volume of the foot. The shoe comes supplied together with the standard insock, but if necessary, can be fitted with the SCS EXTRA thicker insock, or with the SCS thinner insock. This ensures a perfect fit, maximum comfort and stability.

J-MORPHIC’S
FEATURES

In order to reach the highest level of SRC (slip resistance), Jolly developed for its Fire and S&R collections a new outsole, shaped on the new J-Morphic last The outline of our new J-Morphic last, much more “rounded”, wants to be a valid alternative to traditional “flat” outsole/last systems that use metallic antiperforation insoles.

The advantages are:
- the profile is more modern, with a wider toe box so that your toes are not cramped together.
- the rounded heel eases the footing during the roll-over phase, avoiding a sharp edge annoyance; it also ensures higher levels of slip resistance.
- a better feet roll-over motion that allows the shoes to perform the 90% of each step without bending the outsole, the creasing stress on its bonding and preventing upper’s wrinkles that can cause pressure points on the foot. The walk will be more comfortable, the foot less stressed and the muscles more relaxed.
- the energy absorption level is given by the rubber compound of the outsole, by the height and shape of its cleats and inner net, by the composite material of the antiperforation insole, and most of all by our J-Morphic last: so that, in order to give our excellence lightness and energy absorption results, Jolly shoes don’t need PU hidden midsoles or inserts that can melt at 130° and make the boot collapse internally.

HEEL
ENERGY ABSORPTION

The absorption level of energy is established by:


- the thickness and composition of the outsole
- the height and the shape of the heel and inner net which also causes a decrease weight and the presence of an air pad for a better heat isolation,
- the composite material of the anti-perforation midsole
- the presence of antishock PU or EVA inserts
- our specific shape.


HONEY-COMB

Peculiar element characterizing the rubber soles for the Jolly footwear of FIRE and SEARCH& RESCUE collection is the internal honey-comb structure. The air cushion created between the upper and the sole increases the properties of heat and cold insulation, in addition it improves the energy absorption of heel thanks to the specific study of heights and thicknesses of the rubber grid. Moreover the sole is lighter and more flexible when compared to the soles that use a PU filling which are proved to have an increased weight and rigidity.

BREATHABILITY
FULL GRAIN LEATHER +400%

The hides used for our uppers are of “full grain” type, therefore they come from the best quality part of the hide. The special tanning treatments applied, give the leather the necessary qualities of water repellence and breathability.


WATERPROOFNESS

Impermeability and breathability allow an increased climate comfort, an essential element for the appropriate performance of the operators within their activities. The new edition of the standard EN ISO 20344:2011 has introduced a dynamic test method for the water resistance of the entire footwear, the so called “flex test”, with a minimum requirement of 4800 flexes. Jolly footwear exceed 300.000 flexes as provided by the Gore Standard, and the top range models can reach even 500.000 flexes!!

CROSSTECH®
FOOTWEAR LAMINATES

Meeting the Demands of Rescue and Recovery

If the risk assessment of the operating environment addresses the need for durable protection against blood and body fluids, CROSSTECH® Laminates provide the solution. CROSSTECH® Laminates are the most durable blood and body fluid penetration resistant and breathable moisture barrier.
Bullet Points
- Superior liquid penetration resistance
- Easy to care for
- Prevents perspiration build-up
- Breathable comfort
- Extremely durable

SOFT SHIELD
JAS JOLLY ANTI-PERFORATION SYSTEM

Jolly Scarpe uses penetration-resistant insoles made by a multilayer construction applying special antiperforation composite textile material “Zero Perforation mm” according to the standard EN 12568:2010. Textile antiperforation insoles compared to the old style metal plates, offer considerable ergonomics and safety advantages: more protective surface, flexibility, insulation, moisture absorption, reduced weight.

ANKLE SHIELD
ANKLE PROTECTION

Many shoes among our collection have an ankle protection insert. We inserted a rigid ankle protection in order to support the ankle in a suitable way and thus restricting the risk of distortions in combination with specific shock absorbing material so to dissipate and reduce the force generated by dangerous impacts.

FLAME SHIELD
HEAT RESISTANCE

High level of heat insulation: all Jolly footwear belonging to the FIRE and SEARCH & RESCUE collections reach the HI³ level with values that exceed of medium 30% the minimum standard EN15090:2012 requirements. The radiant heat insulation exceeds of medium 70% the minimum requirements of EN15090:2012.

QRS SHIELD
TOTAL OPENING ZIPPER QUICK-RELEASE

The lacing system with the total opening zipper Quick-Release allows the highest level of adjustment and precision of lacing, as well as the easeness of release of the footwear. ADJUSTMENT/PRECISION/RELEASE are the pivot point of the implementation to the concept of safety, of our know-how in terms of ergonomics and namely are the result of continuous and effective relationship with the end users. The completely splittable zipper, allows a complete cleaning of the footwear, even in those spots that are not-accessible with traditional zippers. The replaceable zip slider means longer lasting life of the whole zipper element and thus saving in accessories costs.

ALU SHIELD
ALUMINIUM 200J TOE CAP

With this aluminium alloy toe cap, Jolly Scarpe introduces a new technology into its safety footwear. The unique and exclusive features of this toe cap are: weight 40% lighter than steel, notch toughness stable up to -50°, high resistance to oxidation, anallergic, not polluting.

altri modelli della linea FIRE FIGHTERS